Rickenbacker International Corporation - Forum http://rickenbacker.com/forum/ | |
360/12c63 Neck Adjustment http://rickenbacker.com/forum/viewtopic.php?f=2&t=16604 |
Page 1 of 1 |
Author: | 964racer [ Mon Jul 01, 2019 10:31 pm ] |
Post subject: | 360/12c63 Neck Adjustment |
Hello-- I was wondering if the 360/12c63 uses the newer truss rod system that will allow me to do a truss rod adjustment without physically bowing the neck before tightening the truss rod ? The instruction manual says for guitars built after 1984, the truss rod can be adjusted normally, however, since the 360/12c63 is a reissue of an older guitar, I was wondering if the truss rod system has been updated. Kevin Smith |
Author: | Beckelman [ Tue Jul 02, 2019 2:51 am ] |
Post subject: | Re: 360/12c63 Neck Adjustment |
It's my understanding that you can tell the difference between old and new truss rods by removing the cover plate and look at the space behind the steel or aluminum spacer block. If behind the spacer block you can see the truss rods then it's the old style, and if you cannot it's the new style; https://hazeguitars.com/blog/rickenback ... adjustment |
Page 1 of 1 | All times are UTC - 8 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |