Board index » Setup And Technical




Post new topic Reply to topic  [ 32 posts ]  Go to page 1, 2, 3, 4  Next
Author Message
 Post subject: manufacturing
 Post Posted: Thu Jun 20, 2013 2:39 pm 
Offline

Joined: Tue Jun 18, 2013 5:03 pm
Posts: 15
I assume the guitar and bass bodies-(woodwork, necks, binding) and the (knobs, frets and machine heads etc) are manufactured in CA/USA? I would like to know if the pickups and associated electrical parts are also manufactured here in the USA or are they outsourced and made overseas with final assembly in the California facility?


Top 
 Profile  
 
 Post subject: Re: manufacturing
 Post Posted: Thu Jun 20, 2013 3:27 pm 
Offline
Site Admin
Site Admin

Joined: Mon Aug 08, 2005 1:00 pm
Posts: 4037
Location: Santa Ana, CA
We produce our own pickups here in the US, and most of the electronic components are US as well. There's a few parts, like capacitors, that apparently aren't made in the USA anymore that we reluctantly buy from Asia.

The machine heads mostly come from Schaller in Germany, with a few from Gotoh in Japan.

Some of the very highly figured wood comes from Canada, though the bulk of our Maple is from Michigan.


Top 
 Profile  
 
 Post subject: Re: manufacturing
 Post Posted: Thu Jun 20, 2013 3:44 pm 
Offline
User avatar

Joined: Wed Jan 16, 2008 3:58 am
Posts: 1332
Location: En Zed
How about the new Caribbean rosewood (which looks fantastic in my opinion)?


Top 
 Profile  
 
 Post subject: Re: manufacturing
 Post Posted: Thu Jun 20, 2013 5:39 pm 
Offline
Site Admin
Site Admin

Joined: Mon Aug 08, 2005 1:00 pm
Posts: 4037
Location: Santa Ana, CA
cjj wrote:
How about the new Caribbean rosewood (which looks fantastic in my opinion)?


Comes from Central America but we're careful to buy from American owned firms.


Top 
 Profile  
 
 Post subject: Re: manufacturing
 Post Posted: Sat Jun 22, 2013 7:23 pm 
Offline
User avatar

Joined: Sun Mar 15, 2009 11:49 pm
Posts: 287
Location: Port Angeles, Wa.
Ahhhhhhh.... but where are the "made in the U.S.A." stickers made?????? :lol: :lol: :lol:


Top 
 Profile  
 
 Post subject: Re: manufacturing
 Post Posted: Sun Jun 23, 2013 12:56 pm 
Offline

Joined: Tue Jun 18, 2013 5:03 pm
Posts: 15
Oh yes, because if you dont buy with American interests (which I can understand to a point) or contribute to his Highness's campaign-the company can be harassed or get raided just like they did to another "long standing" American company. Absolutely disgraceful! You would think they could spend their time going after hard line criminals instead of a reputable guitar builder!


Top 
 Profile  
 
 Post subject: Re: manufacturing
 Post Posted: Sat Jun 29, 2013 12:34 pm 
Offline
User avatar

Joined: Thu Aug 11, 2005 1:00 pm
Posts: 924
Location: Kansas City, Missouri
If you're talking about Gibson, then you're talking about a company that deserved what it got when it imported Madagascar ebony illegally. The law violated had nothing to do with whether or not it was sourced in the USA (ebony's not grown here), it had to do with laws broken involving importation of endangered species, and Madagascar ebony is well known to be one of them. The right wing source you probably read about that from undoubtedly failed to mention that laws were broken, and that it had nothing to do with "Big Brother" wanting to hurt Gibson. Not only does RIC source most of their supplies domestically, but it wants no part in using black market sources involved in the decimation of endangered species. This is why they don't build guitars with ebony fingerboards or the original style crushed shell inlays anymore.


Top 
 Profile  
 
 Post subject: Re: manufacturing
 Post Posted: Mon Jul 01, 2013 7:54 am 
Offline
User avatar

Joined: Thu Jan 06, 2011 10:08 pm
Posts: 227
Location: Jackson, Mississippi
Wow, how long before this topic gets closed and locked by admins?


Top 
 Profile  
 
 Post subject: Re: manufacturing
 Post Posted: Mon Jul 01, 2013 8:06 am 
Offline
User avatar

Joined: Thu Aug 11, 2005 1:00 pm
Posts: 924
Location: Kansas City, Missouri
Rickissippi wrote:
Wow, how long before this topic gets closed and locked by admins?


Probably never. This isn't the Rickenbacker Resource Forum where posts get edited or deleted based on the thin skins of a few.


Top 
 Profile  
 
 Post subject: Re: manufacturing
 Post Posted: Mon Jul 01, 2013 9:21 am 
Offline
User avatar

Joined: Thu Jan 06, 2011 10:08 pm
Posts: 227
Location: Jackson, Mississippi
aceonbass wrote:
Rickissippi wrote:
Wow, how long before this topic gets closed and locked by admins?


Probably never. This isn't the Rickenbacker Resource Forum where posts get edited or deleted based on the thin skins of a few.

You're joking, right? Posts here are regularly edited and/or deleted (including one of my own here) based on content. This is the *corporate* forum - it's way more administrated than the other one, and rightfully so, as the folks at RIC do need to watch their own forum moreso than a public one. Of course, RIC is on summer vacation until next Monday, so if it is administrated, it won't be until then.

Check out the forum rules:

>>While using our forums, please refrain from making denigrating comments about other forums users, other companies, authorized RIC dealers, and RIC.

>>This is a corporate owned forum; as such, certain controversial or provocative topics that might be acceptable elsewhere are simply not appropriate here.


Last edited by Rickissippi on Mon Jul 01, 2013 9:24 am, edited 1 time in total.

Top 
 Profile  
 
Display posts from previous:  Sort by  
 
Post new topic Reply to topic  [ 32 posts ]  Go to page 1, 2, 3, 4  Next

Board index » Setup And Technical


Who is online

Users browsing this forum: SharonNoili and 3 guests

 
 

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

Register    Login    Forum    Search    FAQ
X